RESOURCES AND AFFILIATE LINKS

DOCUMENTS AND GUIDES

THE PROJECT

SATSTACKINGPLEB’S STORE

MONTANI AFFILIATES

SHOPPING LIST

  1. S19-Kpro HASHBOARD (BHB56902 OR BHB56903)

  2. CONTROL BOARD AMLOGIC A113D (THE MODEL WITH 2 X SQUARE + 2X RECTANGLE FAN PORTS)

  3. LOKI BOARD (LOKI LITE) + JUMPER CABLE

  4. APW3++ PSU (FROM OLD S9)

  5. ANTMINER CHASSIS (S19)

  6. WILL NEED PSU CABLES FROM PSU. ONE 6 PIN PCIe CONNECTOR (3 YELLOW 3 BLACK)

  7. (2) 16 AWG LUG FOR PCIe CABLE

  8. 15 INCHES OF 4 AWG CABLE (RED) AND 15 INCHES OF 4 AWG CABLE (BLACK)

  9. (4) 4 AWG ¼ BATTERY LUGS

  10. (4) HEAT SHRINK TUBING (2 RED/2BLACK)

  11. 18 PIN BITMAIN ANTMINER SIGNAL CABLE (HASBOARD CABLE)

  12. M3 BOLTS (EASIEST TO BUY KIT)

  13. (2) GELIED GALE FORCE FANS, OR NOCTUA FANS. (ENSURE YOU PRINT THE RIGHT ONE)

  14. PAINT (HEAT RESISTANT) *OPTIONAL

  15. PETG CARBON FIBER FILAMENT

  16. 125V POWER CORD (LIKE ON A TV OR MONITOR)

PART LIST NOTES

PRINT GUIDE

  1. Go to SatStackingPleb’s Github for the Slim19 project. (linked above)

  2. Download the files.

  3. Shoot SatStackingPleb some sats on NOSTR or his website for his hard work.

  4. Print Size: The split slide version is ok to print on a 256x256 print bed, the larger single slide piece will need to be printed on a printer with a size of 300 or better.

  5. PETG Carbon Fiber is recommended, PETG will get the job done, but if you use PLA you will likely set your house on fire if you try to mine on a miner created with this. I wouldn’t even attempt.

  6. The settings I use for this print are: Nozzle Temp 260, Bed Temp 80, 30% infill (for Rigidity).

  7. Make sure to dehumidify filament before use. PETG will string up pretty badly if it is humid.

  8. Use plenty of glue stick on the print bed, I have had prints go ten hours then come unstuck and spaghetti out overnight.

**I am pretty new to 3D Printing. I am using a Creality Max and stock software. I know this is abysmal print times, so if anyone wants to improve this guide, someone needs to teach me how to use some different software. (Reach out on X or through the contact form on this site).

Total Print Time: 20.5 hours

Total Material used: 615G

Previous

CONSULTING